Publications

• W diffraction limited monolithic ytterbium doped fiber laser system operating at 976 nm in the continuous wave regime (2019-06-23)
• UV 20W-class single-mode nanosecond pulse delivery using a vacuum-free/ambient air inhibited-coupling hollow-core fiber (2023-06-23)
• Ultrafast full PM Er-doped fiber laser seeder for Alexandrite amplifiers (2023-01-31)
• Ultra-low intensity noise, all fiber 365 W linearly polarized single frequency laser at 1064 nm (2020-04-13)
• Ultra-high brightness, low insertion loss, kW-class co and contra propagative 6+1:1 combiner (Conference Presentation) (2019-03-04)
• TRANSPORT DE LUMIÈRE FAÇONNÉE PAR RÉSEAU DE NEURONES À TRAVERS UNE FIBRE MULTIMODALE À CŒUR CREUX (2025-07-07)
• Thulium Holmium co-doped tunable fiber laser
• Thermal lensing effects in rod-based Tm ³⁺ : YLF amplifiers versus pump and cooling conditions (2018-06-01)
• Synthèse de préformes alumino-phospho-silicate par voie poudre pour la réalisation de laser à fibre (2022-01-01)
• Splicing fluoride glass and silica optical fibers (2019-01-01)
• Sub-100 fs all-fiber polarisation maintaining tunable laser from ~1870 nm up to ~2050 nm (2023-06-26)
• Sub-100 fs all-fiber polarization maintaining widely tunable laser at 2 µm (2023-10-15)
• Sub-150 fs all-fiber polarization maintaining tunable laser in the mid-infrared (2020-02-21)
• Sub-50 fs all-fiber source based on a 100 ps passively Q-switched microchip laser (2014-06-08)
• Synthèse de préformes dopées ytterbium par voie poudre pour la réalisation des lasers à fibre de haute puissance (2023-11-07)
• Termination of special optical fibers for their integration in high performance laser system (2014-07-27)
• SBS management in Yb-fiber-amplifiers using multimode seeds and pulse-shaping (2014-08-25)
• Réalisation d'une cavité Fabry-Pérot par inscription laser directe autour d'une fibre à coeur creux : vers des applications de refroidissement des atomes alcalins (2024-07-01)
• Record power transmission of intense 343 nm UV radiation in a single-mode inhibiting coupling hollow-core fiber exceeding 20W of 10-ns pulses (2022-01-01)
• Record power transmission of intense UV radiation in a single-mode hollow-core fiber with 23.3W, 155µJ, 10ns pulses at 343nm (2022-03-04)
• Regime-dependent photo-darkening-induced modal degradation in high power fiber amplifier (2016-10-30)
• Robust all-fiber 200W single frequency laser at 1064 nm with low intensity noise (2019-06-23)
• Scalable amplification with a high gain x energy product at room temperature using a thick slab of Yb3+:YAG (2020-02-21)
• Sets of microlens arrays to finely shape homogenized focal spots (2019-04-01)
• Shaped light transmission through a hollow-core multimode fiber modeled using a neural network
• Source laser fibrée picoseconde de forte puissance moyenne et de forte puissance crête à 2 µm (2018-07-02)
• Nonlinear compression of industrial ultrafast lasers in hypocyloid-core Kagome hollow-core fiber (orale) (2015-02-01)
• New method approach to estimate the thermal volume flow deposited within the crystal over laser pumping (Conference Presentation) (2018-03-14)
• Nonlinear compression of a femtosecond fiber chirped pulse amplifier in hypocycloid core Kagome fiber (orale) (2014-08-01)
• Nonlinear compression of high energy fiber amplifier pulses in air-filled hypocycloid-core Kagome fiber (2015-03-23)
• On-demand orbital angular momentum modes through hollow-core multimode fiber via a neural network model (2026-01-12)
• Optimization of kW-class fiber splices and packages for ultra-high-power applications (2021-04-19)
• Optimized terahertz generation via optical rectification in ZnTe crystals (2014-01-01)
• Photodarkening kinetics in a high-power YDFA versus CW or short-pulse seed conditions (2017-02-22)
• Photonic crystal fiber-based components for high power industrial Fs laser applications (Conference Presentation) (2019-03-04)
• Multi-100W class, fully integrated, monolithic ytterbium-doped photonic-crystal fiber amplifier module (2016-04-22)
• Modelling the competition between photo-darkening and photo-bleaching effects in high-power ytterbium-doped fibre amplifiers
• Millijoule-class Yb-doped pulsed fiber laser operating at 977 nm (2010-05-15)
• Longitudinal mode-filling to cancel SBS in fully-fibered MOPAs dedicated to the production of high-energy nanosecond pulses (2014-05-01)
• LED pumped alexandrite multipass amplifier designed for acousto-optic imaging (2025-09-22)
• Innovative Pure-Erbium-Doped VLMA Fibers Delivering High Peak Power at \boldsymbol1.5 \mu \mathbfm for Eye-Safe Solutions (2025-06-01)
• Industrie du futur pour la fabrication de composants hybrides (2023-11-10)
• Highly tunable, multi-GHz repetition rate optical parametric oscillator driven by an electro-optic comb (2021-06-21)
• Highly efficient watt level single frequency 780 nm laser (2014-08-20)
• High-efficiency femtosecond ablation of silicon with GHz repetition rate laser source (2019-05-01)
• High-energy post-compression in hypocycloid-core Kagome fiber (2014-11-16)
• High-energy solitonic source of high harmonics (2023-03-09)
• High-energy, 34 fs, fiber source via nonlinear compression in hypocycloid-core Kagome fiber (2015-05-01)
• High-energy, 34 fs, fiber source via nonlinear compression in hypocycloid-core Kagome fiber (Orale) (2015-05-01)
• High-gain amplification in Yb:CaF2 crystals pumped by a high-brightness Yb-doped 976 nm fiber laser (2013-05-01)
• High-gain, high-energy picosecond Nd:YVO4 amplifier end-pumped at 880 nm (orale) (2016-02-01)
• High-power all-fiber ultra-low noise laser (2018-05-26)
• High-power nonlinear amplification of an ultrafast electro-optic frequency comb with flexible GHz repetition rate (2022-03-28)
• Highly efficient mJ level laser amplifiers at 2 microns for frequency comb spectroscopy (2019-07-12)
• High gain amplification up to 100 mJ to 3 J using Yb ³⁺ :YAG slab-based cat’s-eye cavities under variable seed and operating conditions (2020-08-01)
• High energy ultrashort pulse delivery through hollow-core photonic crystal fiber (2021-03-05)
• High average power, high energy fiber laser system : operation at 977 nm and frequency doubling at 488 nm (2010-01-31)
• High average power and high energy transport of ultrashort pulses with a low loss Kagome hollow-core photonic crystal fiber for micromachining (2013-05-12)
• Giant pulse at 2 µm in polarization maintaining silica step-index fiber (2019-06-23)
• Fused fiber components for parallel coherent fiber lasers
• Free-running operation of a semi-monolithic LBO-based resonant cavity for high-power continuous-wave second-harmonic generation (2025-09-20)
• Fiber delivery of UV nanosecond lasers using hollow-core fibers (2023-10-16)
• Electro-optic comb pumped optical parametric oscillator with flexible repetition rate at GHz level (2021-04-01)
• Extended Modal Gain Measurement in DFB Laser Diodes (2017-01-01)
• Femtosecond laser writing of Fiber Bragg Grating within a PM active fiber for 1535 nm all-fiber laser demonstration (2024-07-28)
• Fiber Optical Parametric Oscillator Delivering Signal Pulse Tunable in Wavelength and Pulse Duration (2023-06-01)
• Fiber optical parametric oscillator pumped by a 16 GHz tunable frequency comb
• Design and real-time control of the OPD from 20 to 200°C in a cat's-eye cavity using thick slabs of Yb³⁺: YAG for athermal amplification (2021-06-15)
• Déport de 23,3 W de puissance moyenne à 343 nm par fibre microstructurée à coeur creux à géométrie tubulaire (2022-07-01)
• Boosting and Taming Wave Breakup in Second Harmonic Generation (2021-01-01)
• 50 μJ, 90 ps Monolithic fiber amplifier passively Q-switched microchip laser with low timing jitter (2013-05-01)
• 2021 Optical Materials Express Emerging Researcher Best Paper Prize: editorial (2022-05-01)
• 3 W Mid-IR supercontinuum extended up to 4.6 µm based on an all-PM thulium doped fiber gain-switch laser seeding an InF3 fiber (2019-03-04)
• 30 TW and 33 fs pulses delivered by a Ti:Sa amplifier system seeded with a frequency-doubled fiber laser (2020-08-20)
• 50 W low-noise single-frequency thulium-doped fiber amplifier at 1844 nm (2025-07-28)
• 55 µm core ytterbium-free erbium-doped VLMA fiber manufactured by REPUSIL technology (2024-03-13)
• A 20\ \upmu \mathrmm-Core PM Endlessly Single-Mode Photonic Crystal Fiber for Delivery of High-Power Single Frequency Lasers (2025-06-01)
• Advances in Integration of Photonic Crystal Fibers in High-power Fiber Laser (2015-11-04)
• All-fiber 10-µJ class femtosecond thulium energy scalable CPA front-end platform based on long-term stable all-PM dissipative soliton oscillator (2025-03-21)
• 1.1 W all-PM fiber laser at 1600 nm delivering 35 fs pulses with 30 nJ energy (2019-09-29)
• 200W electro-optic frequency comb from a monolithic fiber laser with tunable repetition rate between 1 and 18 GHz featuring 200 fs pulses (2022-03-04)
• 200-W single frequency laser based on short active double clad tapered fiber (2018-02-26)
• 180 W Single-Mode Laser Operation of an Yb:YAG Thin Disk using a Robust Direct-Bonding Process (2019-06-01)
• 178 fs, 1.2 nJ pulses from an all-polarization maintaining fiber figure 8 laser based on 3 × 3 coupler at 1 <i>μ</i> m (2020-05-01)
• 120W single frequency laser based on short active double clad tapered fiber (2017-06-25)
• 1.8 mJ pulses at 1560 nm based on a 55 µm core pure-erbium-doped VLMA fiber (2024-11-01)